Carbon Steel

S235 Steel Properties & Equivalent Material S235 steel is a commonly used designation for a structural steel grade in the European Union. It is also known as St37 in Germany, and by various other names in different countries. S235 material is…
Read More...

SAE AISI 1018 Steel SAE AISI 1018 steel is one of the commonly used low carbon steels. It is usually used as carburized steel. Since most of the 1018 carbon steel is produced by cold drawing, this cold rolled steel is called C1018 (1018 cold rolled…
Read More...

AISI 1095 Steel SAE AISI 1095 steel is one of the most widely used 10 series steels, with good performance and low cost, with appropriate toughness and wear resistance, but poor corrosion resistance. 1095 Carbon Steel Applications AISI SAE 1095…
Read More...

1.0122 Steel S235JRC+C, S235JR+AR, S235JR+N S235JRC steel (EN 1.0122 material), S235JRC+C, S235JR+AR and S235JR+N are different delivery and surface conditions of S235JR steel according to the European standard EN 10025-2 and EN 10277-2 (replaced by…
Read More...

ASTM A36 Steel ASTM A36 steel is one of the most widely used carbon structural steels, although the carbon content of A36 material is maximum 0.29%, it is considered to be the mild steel (content of carbon ≤ 0.25%). A36 mild steel is often…
Read More...

S235JR Material (1.0038 Steel) in EN 10025-2 S235JR material also known as 1.0038 steel, is a non-alloy structural steel grade defined in the European standard EN 10025-2. It is part of the S series of steel grades, which includes various grades…
Read More...

ASTM SAE AISI 1020 Steel AISI 1020 steel is also known as C1020 steel in cold worked (cold rolled or cold drawn) condition. 1020 carbon steel is one of the most commonly used plain carbon steels, has good machinability and weldability. SAE AISI 1020…
Read More...

Q355 Steel: Q355B, Q355C, Q355D Q355 steel is a low alloy high strength structural steel commonly used in China, which replaced Q345. The material has a minimum yield strength of 355 MPa (51 ksi) and a tensile strength of 470-630 Mpa (68-91 ksi).…
Read More...

Q235 Steel (Q235A Q235B Q235C Q235D) Q235 steel is a plain carbon structural steel which is widely used in China. Q235 material in Chinese standard GB/T 700 is divided into 4 quality grades: Q235A, Q235B, Q235C and Q235D; Density of this steel is…
Read More...

GB 65Mn Steel 65Mn steel is a Chinese GB standard spring steel grade, Manganese (Mn) improves hardenability, so the strength, hardness, elasticity and hardenability are higher than that of 65# steel, but it has overheat sensitivity and temper…
Read More...