World Material -

S355MC Steel - 1.0976 Material S355MC steel (material 1.0976) is a thermomechanically rolled steel with high yield strength. It is essentially a subdivision grade of S355 steel. S355MC has a minimum yield strength of 355MPa and a tensile strength of…
Read More...

European Standard Designation Systems for Steel Names 1. Designation & Meaning of Structural Steel Names The first letter indicates the type of steel, The following digits indicates the yield strength MPa; The 2 symbols immediately…
Read More...

EN10025 S355JR Steel (1.0045 Material) S355JR steel (1.0045 material) is one of the quality grades in S355 steel group, the steel has a minimum yield strength of 355 MPa (51 ksi) when the thickness is ≤16mm, and the minimum impact energy 27J at room…
Read More...

S355J2 Steel (Material 1.0577) S355J2 steel (1.0577) is a quality grade of S355 steel, which is one of the non-alloy structural steels commonly used in Europe. According to EN 10025-2: Hot rolled products of structural steels, S355 steel is divided…
Read More...

Melting Point of Steel - Low (Mild), Medium & High Carbon Steel Melting Temperature (Temp) The melting point of steel is 1300-1540°C (2370-2800°F), depending primarily on the chemical composition of the steel, which can affect the strength of…
Read More...

5754 Aluminum Alloy 5754 aluminum alloy is a typical Al-Mg alloy containing 2,6-3,6% magnesium. The addition of magnesium precipitates Mg2Si in the matrix to provide strengthening. Common tempers of the material have 5754-H111 and 5754 H22, H12,…
Read More...

5083 Aluminum Alloy - Al 5083 H116 H111 H321 5083 aluminum is essentially a non-heat treatable alloy containing 4-4.9% Mg and 0.4-1.0% Mn. It is a relatively inexpensive alloy with moderate strength, excellent cold forming, welding and spot welding…
Read More...