Wiki

Density of Metals - List of Metals by Density Different metals have different densities, and the density difference between some metals is huge. For example, the most dense metal is Osmium (Os), with a density of 22.59 g/cm3, which is 42 times that…
Read More...

Does Aluminum Rust or Corrode? Aluminum does not rust or corrode under most conditions of use and has high corrosion resistance. When the surface of aluminum is exposed to the atmosphere, it will immediately form a thin invisible oxide film…
Read More...

Does Stainless Steel Rust? In general, stainless steel does not rust, but if it is used or maintained improperly, or in a harsh environment, it will rust or tarnish, for example, the photo above shows a stainless steel shackle on a cruise ship…
Read More...

Definition of Thermal Conductivity Thermal conductivity also called heat conductivity, refers to the the heat transferred "K", due to the unit temperature gradient, under steady conditions, in a unit time, in the direction perpendicular to the…
Read More...

Melting Point of Stainless Steel Approximate melting point of stainless steel is 2550-2790 °F (1400-1530 °C). Stainless Steel Melting Temperature Range The following table lists various grades of stainless steel melting temp in Fahrenheit (°F) and…
Read More...

Weight & Density of Aluminum 6061, 7075, 2024, 3003, 5052, etc. The mass density of aluminum is 2.7 g/cm3 (0.0975 lb/in3), which is about 1/3 of that of steel (7.83 g/cm3), copper (8.93 g/cm3) or brass (8.53 g/cm3). The weight of aluminum per…
Read More...

Weight & Density of Stainless Steel 304, 316, 304L & 316L The density of stainless steel is about 7.9 g/cm3. The weight of stainless steel per cubic inch is 0.285 pound, per cubic foot is 490 pounds. Density also known as specific mass or…
Read More...

What is Steel - Different Types of Steel Steel, also known as ferrous materials, are base metals, including pig iron, ferroalloys, cast iron, cast steel, structural steel, tool steel, stainless steel, and heat-resistant steel, etc. They are all…
Read More...

What is Carbon Steel? Carbon steel is an iron-carbon alloy with a mass carbon percentage content ≤ 2.0% and containing a small amount of impurity elements such as manganese (Mn), silicon (Si), sulfur (S), phosphorus (P), and oxygen (O), etc. What…
Read More...