Alloy Steel

AISI S7 Tool Steel. AISI S7 tool steel is a Shock-Resisting Steel with the highest hardenability and elevated temperature softening resistance of the S-series steels. Due to these properties, S7 material is popular in shock-resistant applications.…
Read More...

H13 Tool Steel Heat Treatment H13 tool steel heat treatment including: Annealing Heat uniformly to 845 to 900 °C (1550 to 1650 °F) in a controlled atmosphere furnace, or place the part in a neutral compound to prevent decarburization and hold to…
Read More...

AISI H13 Tool Steel AISI H13 steel is a 5% Cr ultra-high strength tool steel alloy with higher content of molybdenum and vanadium. Molybdenum provides excellent toughness and high hardenability; Vanadium results in a higher degree of dispersion of…
Read More...

AISI 316L Stainless Steel (UNS S31603) AISI 316L stainless steel is a modified ultra-low carbon Cr-Ni-Mo series austenitic stainless steel based on AISI 316. It is recommended for parts that cannot be annealed after welding in certain corrosive…
Read More...

321 Stainless Steel Machinability and Machining Grade 321 stainless steel machinability is 36% in annealed conditoin based on a machinability rating of 100% for 1212 steel. Nominal speeds and feeds for turning a variety of steels and cast…
Read More...

A2 Steel - Tool, Die and Blade Steel A2 steel is one of the most readily available and widely used tool steel grades. It has deep hardening, low distortion and high heat treatment safety, high resistance to high temperature softening and medium…
Read More...

SKD10 and SKD11 Steel Both SKD10 and SKD11 steel are high carbon and high chromium cold-work alloy tool steels with good hardenability, small heat treatment deformation, high hardness, high wear resistance and impact resistance. Material Properties…
Read More...

D2 Steel - Tool, Die and Blade Steel D2 steel is a kind of ledeburite tool steel, which is the most available and popular among D-series tool steels. Its hardness can reach 60+HRC after heat treatment. The material contains up to 1.6% carbon and 13%…
Read More...

AISI 310 Stainless Steel (UNS S31000) AISI 310 stainless steel is a high chromium nickel austenitic stainless steel with a high carbon content. It has excellent mechanical properties, high temperature oxidation resistance and heat resistance.…
Read More...

ASTM A572 Grade 50 Steel ASTM A572 grade 50 steel is a low-alloy high-strength structural steel with a yield strength of 50 ksi (345 MPa) and a tensile strength of 65 ksi (450 MPa). It has better mechanical properties than ASTM A36 steel. ASTM A572…
Read More...