European EN Standards – BSI | DIN Standard

S355MC Steel - 1.0976 Material S355MC steel (material 1.0976) is a thermomechanically rolled steel with high yield strength. It is essentially a subdivision grade of S355 steel. S355MC has a minimum yield strength of 355MPa and a tensile strength of…
Read More...

European Standard Designation Systems for Steel Names 1. Designation & Meaning of Structural Steel Names The first letter indicates the type of steel, The following digits indicates the yield strength MPa; The 2 symbols immediately…
Read More...

EN10025 S355JR Steel (1.0045 Material) S355JR steel (1.0045 material) is one of the quality grades in S355 steel group, the steel has a minimum yield strength of 355 MPa (51 ksi) when the thickness is ≤16mm, and the minimum impact energy 27J at room…
Read More...

S355J2 Steel (Material 1.0577) S355J2 steel (1.0577) is a quality grade of S355 steel, which is one of the non-alloy structural steels commonly used in Europe. According to EN 10025-2: Hot rolled products of structural steels, S355 steel is divided…
Read More...

5754 Aluminum Alloy 5754 aluminum alloy is a typical Al-Mg alloy containing 2,6-3,6% magnesium. The addition of magnesium precipitates Mg2Si in the matrix to provide strengthening. Common tempers of the material have 5754-H111 and 5754 H22, H12,…
Read More...

Aluminium 6060 T5, T6, T4 - Material 3.3206 - AlMgSi0.5 (AlMgSi) Aluminum 6060 (3.3206) is a typical extruded Al-Mg-Si aluminum alloy, slightly weaker than AA6063, suitable for applications without special strength requirements and can produce…
Read More...

6082 Aluminum Alloy - Al 6082-T6 T651 T4 - AlSi1MgMn (AlMgSi1 - 3.2315) 6082 aluminum is an Al-Mg-Si heat-treatable reinforced alloy with good formability, weldability, machinability, medium strength, and good operability after annealing. The main…
Read More...

DIN 1.2343 Steel (Material X37CrMoV5-1) DIN 1.2343 steel is a hot work tool steel, the US equivalent material is H11 steel, which has excellent machinability and polishability, good high toughness and plasticity, high wear resistance at high and low…
Read More...

1.4104 Stainless Steel (X14CrMoS17 Material) DIN EN 1.4104 stainless steel (X14CrMoS17) is a kind of martensitic stainless steel containing molybdenum. The higher sulfur content makes it more suitable for machining. It has good machining properties,…
Read More...

DIN EN 1.4057 Stainless Steel (X17CrNi16-2 Material) DIN EN 1.4057 stainless steel (X17CrNi16-2 material) is a nickel-containing martensitic stainless steel, which has better corrosion resistance and mechanical properties than straight chromium…
Read More...