Carbon Steel

EN 1.0114 Material (S235J0 Steel) The S235J0 steel (1.0114 material) is an unalloyed carbon steel steel grade according to EN 10025-2. Steel S235J0 meaning "S" stands for structural steel; "235" means the minimum yield strength (MPa) for…
Read More...

S235J2 Steel (1.0117 Material) The S235J2 steel (1.0117 material) is an non-alloy carbon steel steel grade in accordance with EN 10025-2. Steel S235J2 Meaning "S" stands for structural steel; "235" means the minimum yield strength (MPa) for…
Read More...

EN 10025-2 S235 Steel EN 10025-2 S235 steel is a non-alloy carbon structural steel grade, according to EN 10025-2, S235 material is devided into 3 quality grades: S235JR (1.0038) - Impact energy ≥27 Joules at room temperature 20 ℃, S235J0…
Read More...

SAE AISI 1018 Steel SAE AISI 1018 steel is one of the commonly used low carbon steels. It is usually used as carburized steel. Since most of the 1018 carbon steel is produced by cold drawing, this cold rolled steel is called C1018 (1018 cold rolled…
Read More...

AISI 1095 Steel SAE AISI 1095 steel is one of the most widely used 10 series steels, with good performance and low cost, with appropriate toughness and wear resistance, but poor corrosion resistance. 1095 Carbon Steel Applications AISI SAE 1095…
Read More...

1.0122 Steel S235JRC+C, S235JR+AR, S235JR+N S235JRC steel (EN 1.0122 material), S235JRC+C, S235JR+AR and S235JR+N are differenct delivery and surface conditions of S235JR steel according to the European standard EN 10025-2 and EN 10277-2 (has been…
Read More...

ASTM A36 Steel ASTM A36 steel is one of the most widely used carbon structural steels, although the carbon content of A36 material is maximum 0.29%, it is considered to be the mild steel (content of carbon ≤ 0.25%). A36 mild steel is often…
Read More...

S235JR Material Introduction EN 10025 S235JR material (1.0038 steel) is an European standard hot rolled non-alloy structural steel grade. It has good plasticity, toughness and weldability, certain strength and good cold bending properties. For…
Read More...

ASTM SAE AISI 1020 Steel AISI 1020 steel is also known as C1020 steel in cold worked (cold rolled and cold drawn) condition. 1020 carbon steel is one of the most commonly used plain carbon steels, has good machinability and weldability. SAE AISI…
Read More...

Q355 Steel Introduction Q355 steel is a new Chinese steel grade of Low Alloy High Strength Structural Steel, which replaced Q345, the material density is 7.85 g/cm3. According to GB/T 1591 -2018, Q355 has 3 quality levels: Q355B, Q355C and Q355D.…
Read More...