Alloy Steel

35CrMo Steel 35CrMo steel is a Chinese alloy steel for engineering purpose, it has high durability and creep strength at high temperature, and low temperature impact toughness is good. The working temperature is up to 500 °C, the low temperature can…
Read More...

40CrNiMoA Steel 40CrNiMoA steel is a Chinese alloy steel, has high strength, toughness and good hardenability, and has anti-overheating stability, but has high white point sensitivity, temper brittleness and poor weldability. Preheating is required…
Read More...

The following tables show 42CrMo vs 4140 vs 42CrMo4 (1.7225) steel, they are similar in chemical composition and mechanical properties and are all belong to alloy steels. Chemical Composition % Country Standard Steel Grade…
Read More...

Introduction 42CrMo steel is a Chinese alloy steel, and has high strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering treatment, it has high fatigue limit and resistance to multiple impacts,…
Read More...

40Cr Alloy Steel 40Cr steel is a kind of Chinese GB standard alloy steel for engineering and machinery purpose, and one of the most widely used steel grades. For 40Cr material hardness, specifications and equivalent, please see the table below.…
Read More...

Q460 Steel Introduction Q460 steel is a Chinese steel grade of Low Alloy High Strength Structural Steel, Yield Strength is 460 MPa, data is tested with 16mm diameter steel bars or steel plates, tensile strength is 550-720 Mpa, test with steel bar…
Read More...

Q420 Steel Introduction Q420 steel is a Chinese steel grade of Low Alloy High Strength Structural Steel, Yield Strength is 420 MPa, parameters are tested with 16mm diameter steel bars or steel plates, and tensile strength is 520-680 Mpa, the…
Read More...

Q390 Steel Introduction and Specifications Q390 steel is a Chinese steel grade of Low Alloy High Strength Structural Steel, Yield Strength is 390 MPa, parameters are tested with 16mm diameter steel bars or steel plates, tensile strength is 470-630…
Read More...

DIN EN 1.2379 Steel (X153CrMoV12 Material) DIN 1.2379 Steel (X153CrMoV12 Material) is a high carbon chromium molybdenum vanadium cold worked tool steel with high wear resistance, good dimensional stability, toughness and hardenability. Due to the…
Read More...