The World Material -

EN8 Steel (BS970 080M40 Material) En8 steel was renamed 080M40 in 1970. It is a commonly used medium carbon engineering steel with good mechanical properties and is widely used in the manufacture of mechanical parts, such as general axles and…
Read More...

AISI 304 Stainless Steel (UNS S30400) AISI 304 stainless steel (UNS S30400) is the most widely used stainless steel, containing 18-20% Cr and 8-10.5% Ni, and also known as 18-8 stainless steel. Type 304 is non-magnetic under annealing conditions,…
Read More...

Definition of Thermal Conductivity Thermal conductivity also called heat conductivity, refers to the the heat transferred "K", due to the unit temperature gradient, under steady conditions, in a unit time, in the direction perpendicular to the…
Read More...

AISI Type 302 Stainless Steel (UNS S30200) Type 302 stainless steel is basically a higher carbon version of type 304, a variant of 18-8 stainless steel. Its carbon content is ≤0.15%, and the minimum chromium content is only 1% less than 304. Grade…
Read More...

AISI 301 Stainless Steel (UNS S30100) AISI 301 stainless steel (UNS S30100) is the most susceptible to cold deformation strengthening among conventional austenitic stainless steels. Its work hardening rate is extremely high, with each increase in…
Read More...

Melting Point of Stainless Steel Approximate melting point of stainless steel is 2550-2790 °F (1400-1530 °C). Stainless Steel Melting Temperature Range The following table lists various grades of stainless steel melting temp in Fahrenheit (°F) and…
Read More...

AISI 410 Stainless Steel, SS410 (UNS S41000) AISI 410 stainless steel is one of the most commonly used martensitic stainless steels. It contains about 12% Cr and therefore provides moderate corrosion resistance. Unlike austenite such as AISI 304 and…
Read More...

Weight & Density of Aluminum 6061, 7075, 2024, 3003, 5052, etc. The mass density of aluminum is 2.7 g/cm3 (0.0975 lb/in3), which is about 1/3 of that of steel (7.83 g/cm3), copper (8.93 g/cm3) or brass (8.53 g/cm3). The weight of aluminum per…
Read More...

DIN EN 10130 DC01 Steel (1.0330 Material) Data Sheet DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03…
Read More...

6061 Aluminum Alloy (AL 6061-T6, 6061-T651, 6061-T4) AL-6061 aluminum alloy is a general purpose structural alloy developed by Alcoa in 1935. The temper designations mainly have 6061-T4, T451, AL 6061-T6, 6061-T651, etc. It is one of the most widely…
Read More...