Wiki

Melting Point of Steel - Low (Mild), Medium & High Carbon Steel Melting Temperature (Temp) The melting point of steel is 1300-1540°C (2370-2800°F), depending primarily on the chemical composition of the steel, which can affect the strength of…
Read More...

H13 Tool Steel Heat Treatment H13 tool steel heat treatment including: Annealing Heat uniformly to 845 to 900 °C (1550 to 1650 °F) in a controlled atmosphere furnace, or place the part in a neutral compound to prevent decarburization and hold to…
Read More...

Stainless Steel Chemical Composition Chart The elemental chemical composition of stainless steel is mainly composed of Ferrum (Fe) and Chromium (Cr), other alloy elements in the chemical composition also include Carbon (C), Silicon (Si), Manganese…
Read More...

Density of Metals - List of Metals by Density Different metals have different densities, and the density difference between some metals is huge. For example, the most dense metal is Osmium (Os), with a density of 22.59 g/cm3, which is 42 times that…
Read More...

Does Aluminum Rust or Corrode? Aluminum does not rust or corrode under most conditions of use and has high corrosion resistance. When the surface of aluminum is exposed to the atmosphere, it will immediately form a thin invisible oxide film…
Read More...

Does Stainless Steel Rust? In general, stainless steel does not rust, but if it is used or maintained improperly, or in a harsh environment, it will rust or tarnish, for example, the photo above shows a stainless steel shackle on a cruise ship…
Read More...

Definition of Thermal Conductivity Thermal conductivity also called heat conductivity, refers to the the heat transferred "K", due to the unit temperature gradient, under steady conditions, in a unit time, in the direction perpendicular to the…
Read More...

Melting Point of Stainless Steel Approximate melting point of stainless steel is 2550-2790 °F (1400-1530 °C). Stainless Steel Melting Temperature Range The following table lists various grades of stainless steel melting temp in Fahrenheit (°F) and…
Read More...

Weight & Density of Aluminum 6061, 7075, 2024, 3003, 5052, etc. The mass density of aluminum is 2.7 g/cm3 (0.0975 lb/in3), which is about 1/3 of that of steel (7.83 g/cm3), copper (8.93 g/cm3) or brass (8.53 g/cm3). The weight of aluminum per…
Read More...