US ASTM AISI and SAE Standards

AISI 304 Stainless Steel (UNS S30400, SS 304) AISI 304 stainless steel (UNS S30400) is the most widely used stainless steel, containing 18-20% Cr and 8-10.5% Ni, and also known as 18-8 stainless steel. SS 304 is non-magnetic under annealing…
Read More...

AISI Type 302 Stainless Steel (UNS S30200) Type 302 stainless steel is basically a higher carbon version of type 304, a variant of 18-8 stainless steel. Its carbon content is ≤0.15%, and the minimum chromium content is only 1% less than 304. Grade…
Read More...

AISI 301 Stainless Steel (UNS S30100) AISI 301 stainless steel (UNS S30100) is the most susceptible to cold deformation strengthening among conventional austenitic stainless steels. Its work hardening rate is extremely high, with each increase in…
Read More...

AISI 410 Stainless Steel, SS410 (UNS S41000) AISI 410 stainless steel is one of the most commonly used martensitic stainless steels. It contains about 12% Cr and therefore provides moderate corrosion resistance. Unlike austenite such as AISI 304 and…
Read More...

6061 Aluminum Alloy (Al 6061-T6, 6061-T651, 6061-T4) Al-6061 aluminum alloy is a general purpose structural alloy developed by Alcoa in 1935. The temper designations mainly have 6061-T4, T451, Al 6061-T6, 6061-T651, etc. It is one of the most widely…
Read More...

AISI 321 Stainless Steel (SS321), 321H, TP321 AISI 321 stainless steel (SS321) is basically type 304 with the addition of titanium (Ti), which stabilizes carbides against sensitization to prevent intergranular precipitation of chromium carbide when…
Read More...

SAE AISI 4340 Steel (UNS G43400) AISI 4340 steel (UNS G43400) is an ultra-high strength medium carbon low alloy steel, which combines deep hardenability, high ductility, toughness and strength, and has high fatigue resistance and creep resistance.…
Read More...

AISI 304 VS 304L Stainless Steel (UNS S30403) AISI 304 and 304L (SS304L) are austenitic stainless steels, and also known as 18/8 stainless steel. This article will introduce the differences between 304 and 304L stainless steel (304 vs 304L) from…
Read More...

AISI 303 Stainless Steel (UNS S30300, SS 303) AISI 303 stainless steel (UNS S30300) was developed for easy cutting and basically belongs to 18-8 stainless steel. It improves the cutting performance while maintaining good mechanical properties. SS…
Read More...

SAF Duplex 2205 Stainless Steel (UNS S32205 S31803) Alloy Material SAF Duplex 2205 stainless steel (UNS S32205 formerly known as UNS S31803 and commonly known as "alloy 2205") has a mixed microstructure of austenite and ferrite, and is a two-phase…
Read More...