Tool Steel

AISI W1 Tool Steel (UNS T72301) AISI W1 steel is a water-hardening tool steel, which has high hardness and wear resistance after quenching and tempering, but low hot hardness, poor hardenability, low plasticity and strength. W1 Steel Properties…
Read More...

AISI S7 Tool Steel. AISI S7 tool steel is a Shock-Resisting Steel with the highest hardenability and elevated temperature softening resistance of the S-series steels. Due to these properties, S7 material is popular in shock-resistant applications.…
Read More...

H13 Tool Steel Heat Treatment H13 tool steel heat treatment including: Annealing Heat uniformly to 845 to 900 °C (1550 to 1650 °F) in a controlled atmosphere furnace, or place the part in a neutral compound to prevent decarburization and hold to…
Read More...

AISI H13 Tool Steel AISI H13 steel is a 5% Cr ultra-high strength tool steel alloy with higher content of molybdenum and vanadium. Molybdenum provides excellent toughness and high hardenability; Vanadium results in a higher degree of dispersion of…
Read More...

SK5 Carbon Steel (SK85 Material) SK5 steel (SK85 material) is a carbon tool steel commonly used in Japan. After quenching and tempering, it has high hardness and good wear resistance, but the hardness decreases at high temperature. It is often used…
Read More...

AISI O1 Tool Steel AISI O1 tool steel is a low alloy type cold work tool steel, containing manganese, chromium and tungsten, which must be hardened by oil quenching. It is by far the most widely used tool steel and is produced by almost all tool…
Read More...

A2 Steel - Tool, Die and Blade Steel A2 steel is one of the most readily available and widely used tool steel grades. It has deep hardening, low distortion and high heat treatment safety, high resistance to high temperature softening and medium…
Read More...

SKD10 and SKD11 Steel Both SKD10 and SKD11 steel are high carbon and high chromium cold-work alloy tool steels with good hardenability, small heat treatment deformation, high hardness, high wear resistance and impact resistance. Material Properties…
Read More...

D2 Steel - Tool, Die and Blade Steel D2 steel is a kind of ledeburite tool steel, which is the most available and popular among D-series tool steels. Its hardness can reach 60+HRC after heat treatment. The material contains up to 1.6% carbon and 13%…
Read More...

DIN 1.2343 Steel (Material X37CrMoV5-1) DIN 1.2343 steel is a hot work tool steel, the US equivalent material is H11 steel, which has excellent machinability and polishability, good high toughness and plasticity, high wear resistance at high and low…
Read More...