Structural Steel

EN 10025-2 S235 Steel EN 10025-2 S235 steel is a non-alloy carbon structural steel grade, according to EN 10025-2, S235 material is devided into 3 quality grades: S235JR (1.0038) - Impact energy ≥27 Joules at room temperature 20 ℃, S235J0…
Read More...

1.0122 Steel S235JRC+C, S235JR+AR, S235JR+N S235JRC steel (EN 1.0122 material), S235JRC+C, S235JR+AR and S235JR+N are differenct delivery and surface conditions of S235JR steel according to the European standard EN 10025-2 and EN 10277-2 (has been…
Read More...

ASTM A36 Steel ASTM A36 steel is one of the most widely used carbon structural steels, although the carbon content of A36 material is maximum 0.29%, it is considered to be the mild steel (content of carbon ≤ 0.25%). A36 mild steel is often…
Read More...

S235JR Material Introduction EN 10025 S235JR material (1.0038 steel) is an European standard hot rolled non-alloy structural steel grade. It has good plasticity, toughness and weldability, certain strength and good cold bending properties. For…
Read More...

Q355 Steel (Q355B Q355C Q355D) Q355 steel is a Chinese low alloy high strength structural steel, which replaced Q345, the material density is 7.85 g/cm3. According to GB/T 1591 -2018, Q355 has 3 quality levels: Q355B, Q355C and Q355D. "Q" is the…
Read More...

Q345 Steel Properties Q345 steel is a Chinese GB standard Low Alloy High Strength Structural Steel, material density is 7.85 g/cm3, tensile strength is 470-630 Mpa, and yield strength is 345 MPa, it has better properties than Q235. According to GB/T…
Read More...

Q235 Steel (Q235A Q235B Q235C Q235D) Q235 steel is a plain carbon structural steel which is widely used in China, Q235 material in Chinese standard GB/T 700 is divided into 4 quality grades: Q235A, Q235B, Q235C and Q235D; Density of this steel is…
Read More...

Chinese GB Standard Carbon Structural Steel Specification Here we show the difference between Q195 vs Q215, Q235 & Q275, these steel series all belong to Chinese standard carbon structural steel, the lising below shows the difference of chemical…
Read More...

Q690 steel and Q690M material is a Chinese GB standard high strength low alloy structural steel, and devides into 3 quality grades: Q690C, Q690D and Q690E, "Q" means Yield Strength, "690" refers to 690 Mpa, Tensile Strength is 770-940 Mpa, "M" is…
Read More...

Q460 Steel Introduction Q460 steel is a Chinese steel grade of Low Alloy High Strength Structural Steel, Yield Strength is 460 MPa, data is tested with 16mm diameter steel bars or steel plates, tensile strength is 550-720 Mpa, test with steel bar…
Read More...