World Material -

Definition of Thermal Conductivity Thermal conductivity also called heat conductivity, refers to the the heat transferred "K", due to the unit temperature gradient, under steady conditions, in a unit time, in the direction perpendicular to the…
Read More...

AISI Type 302 Stainless Steel (UNS S30200) Type 302 stainless steel is basically a higher carbon version of type 304, a variant of 18-8 stainless steel. Its carbon content is ≤0.15%, and the minimum chromium content is only 1% less than 304. Grade…
Read More...

AISI 301 Stainless Steel (UNS S30100) AISI 301 stainless steel (UNS S30100) is the most susceptible to cold deformation strengthening among conventional austenitic stainless steels. Its work hardening rate is extremely high, with each increase in…
Read More...

Melting Point of Stainless Steel Approximate melting point of stainless steel is 2550-2790 °F (1400-1530 °C). Stainless Steel Melting Temperature Range The following table lists various grades of stainless steel melting temp in Fahrenheit (°F) and…
Read More...

AISI 410 Stainless Steel, SS410 (UNS S41000) AISI 410 stainless steel is one of the most commonly used martensitic stainless steels. It contains about 12% Cr and therefore provides moderate corrosion resistance. Unlike austenite such as AISI 304 and…
Read More...

Weight & Density of Aluminum 6061, 7075, 2024, 3003, 5052, etc. The mass density of aluminum is 2.7 g/cm3 (0.0975 lb/in3), which is about 1/3 of that of steel (7.83 g/cm3), copper (8.93 g/cm3) or brass (8.53 g/cm3). The weight of aluminum per…
Read More...

DIN EN 10130 DC01 Steel (1.0330 Material) Data Sheet DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03…
Read More...

6061 Aluminum Alloy (Al 6061-T6, 6061-T651, 6061-T4) Al-6061 aluminum alloy is a general purpose structural alloy developed by Alcoa in 1935. The temper designations mainly have 6061-T4, T451, Al 6061-T6, 6061-T651, etc. It is one of the most widely…
Read More...

AISI 321 Stainless Steel (SS321), 321H, TP321 AISI 321 stainless steel (SS321) is basically type 304 with the addition of titanium (Ti), which stabilizes carbides against sensitization to prevent intergranular precipitation of chromium carbide when…
Read More...

JIS G3101 SS400 Steel SS400 steel is the most commonly used hot-rolled structural steel (formerly known as SS41) in Japan, and is called general structural rolled steel in JIS G3101. SS400 material is cheap and versatile, and plays an important role…
Read More...