The World Material -

S235J2 Steel (1.0117 Material) The S235J2 steel (1.0117 material) is an non-alloy carbon steel steel grade in accordance with EN 10025-2. Steel S235J2 Meaning "S" stands for structural steel; "235" means the minimum yield strength (MPa) for…
Read More...

EN 10025-2 S235 Steel EN 10025-2 S235 steel is a non-alloy carbon structural steel grade, according to EN 10025-2, S235 material is devided into 3 quality grades: S235JR (1.0038) - Impact energy ≥27 Joules at room temperature 20 ℃, S235J0…
Read More...

EN 1.4404 Stainless Steel (X2CrNiMo17-12-2) EN 1.4404 material (stainless steel X2CrNiMo17-12-2) is a low-carbon version of 1.4401 (X5CrNiMo17-12-2), the maximum carbon content is only 0.03%, while 1.4401 is 0.07% maximum, so the weldability and…
Read More...

SAE AISI 1018 Steel SAE AISI 1018 steel is one of the commonly used low carbon steels. It is usually used as carburized steel. Since most of the 1018 carbon steel is produced by cold drawing, this cold rolled steel is called C1018 (1018 cold rolled…
Read More...

SUS304 Stainless Steel Introduction SUS304 material is a Japanese JIS standard and the most commonly used stainless steel, containing 18% Cr and 8% Ni. It can maintain good strength and heat resistance in high temperature and low temperature…
Read More...

AISI 1095 Steel SAE AISI 1095 steel is one of the most widely used 10 series steels, with good performance and low cost, with appropriate toughness and wear resistance, but poor corrosion resistance. 1095 Carbon Steel Applications AISI SAE 1095…
Read More...

AISI 4130 Chromoly Steel (UNS G41300) AISI 4130 steel (UNS G41300), also known as 4130 Chromoly steel, is a chrome-molybdenum series low alloy steel with high strength, toughness and hardenability, usually used in quenched and tempered condition.…
Read More...

SAE AISI 4140 Alloy Steel SAE 4140 (AISI 4140 steel) is a Cr-Mo series (Chrome molybdenum series) low alloy steel, this material has high strength and hardenability, good toughness, small deformation during quenching, high creep strength and…
Read More...

EN 1.4571 Material (X6CrNiMoTi17-12-2 Stainless Steel) DIN EN 1.4571 material (X6CrNiMoTi17-12-2) is made by adding titanium (Ti) to EN 1.4401 stainless steel (X5CrNiMo17-12-2) to improve the resistance to intergranular corrosion. Titanium can…
Read More...

1.0122 Steel S235JRC+C, S235JR+AR, S235JR+N S235JRC steel (EN 1.0122 material), S235JRC+C, S235JR+AR and S235JR+N are differenct delivery and surface conditions of S235JR steel according to the European standard EN 10025-2 and EN 10277-2 (has been…
Read More...