World Material -

DIN EN 10130 DC01 Steel (1.0330 Material) Data Sheet DC01 steel (1.0330 material) is a European standard cold-rolled quality low-carbon steel flat product for cold forming. In BS and DIN EN 10130 standard, it contains 5 other steel grades: DC03…
Read More...

6061 Aluminum Alloy (Al 6061-T6, 6061-T651, 6061-T4) Al-6061 aluminum alloy is a general purpose structural alloy developed by Alcoa in 1935. The temper designations mainly have 6061-T4, T451, Al 6061-T6, 6061-T651, etc. It is one of the most widely…
Read More...

SS321, AISI 321 Stainless Steel 321H, TP321 AISI 321 stainless steel (SS321) is basically type 304 with the addition of titanium (Ti), which stabilizes carbides against sensitization to prevent intergranular precipitation of chromium carbide when…
Read More...

JIS G3101 SS400 Steel SS400 steel is the most commonly used hot-rolled structural steel (formerly known as SS41) in Japan, and is called general structural rolled steel in JIS G3101. SS400 material is cheap and versatile, and plays an important role…
Read More...

DIN EN 1.2842 Steel 90MnCrV8 Material DIN EN 1.2842 steel (90MnCrV8) is a European standard cold work tool steel and one of the most widely used tool steels, with high dimensional stability and edge retention and good machinability. Its properties…
Read More...

SAE AISI 4340 Steel (UNS G43400) AISI 4340 steel (UNS G43400) is an ultra-high strength medium carbon low alloy steel, which combines deep hardenability, high ductility, toughness and strength, and has high fatigue resistance and creep resistance.…
Read More...

AISI 304 VS 304L Stainless Steel (UNS S30403) AISI 304 and 304L (SS304L) are austenitic stainless steels, and also known as 18/8 stainless steel. This article will introduce the differences between 304 and 304L stainless steel (304 vs 304L) from…
Read More...

AISI 303 Stainless Steel (UNS S30300, SS 303) AISI 303 stainless steel (UNS S30300) was developed for easy cutting and basically belongs to 18-8 stainless steel. It improves the cutting performance while maintaining good mechanical properties. SS…
Read More...

Type of surface finish and process route of semi-finished products, rods and wires, bars and sections (EN 10088-3) Conditions Recommended use and observations EN 10088-3 Symbol Surface finish Type of process route Hot formed…
Read More...

DIN EN 1.4034 Stainless Steel X46Cr13 Material X46Cr13 material (DIN EN 1.4034 stainless steel) is a European EN standard martensitic stainless steel. It has good polishing and mechanical properties, but poor weldability. Due to its higher carbon…
Read More...